João Oliveira, Margarida Felgueiras, Gonçalo Furtado, “Arquitectura e Educação Pré-escolar: Uma contextualização desta relação em Portugal”,
in:
Painel “Infancia e relações de genero na história da educação, Centro de ciências sociais, 17-6-2011
IV EMHE: Encontro Maranhense de História da Educaçao”, MA/UFMA (Nucleo de Estudos e Documentação em Histtória da Educação e das Práticas Leitiras do Maranhão),
Sao Luis-Brasil, 14-17 Junho 2011.
Veja-se: Anais IV Encontro Maranhense de História da Educaçao: A instrução no oitocentos perspectivas históricas”, NEDHE/UFMA (Nucleo de Estudos e Documentação em Histtória da Educação e das Práticas Leitiras do Maranhão), Sao Luis-Brasil, Junho 2011 (DVD issn 2236-3971).
6/16/11
Superficies Interactivas
Gonçalo Furtado et al, “Relatório de Progresso PP99: Superficies Arquitectónicas Interactivas modeladas em Materiais Compósitos”, Universidade Porto, Porto, Abril 2011
3/30/11
Participation and Cedric Price
Gonçalo Furtado, "...Pensamento sistémico, representação arquitectónica e Cedric Price", in: Arq./a, Nº90-91, Março-Abril 2011, p-110-113
2/17/11
Safety and Health
Gonçalo Furtado, "Ergonomics, space-funcional analysis and shelters for emergency situatons",
in: 2º Coloquio "Occupational safety and health" (5th session), FEUP-DemSSO, 17 Decembee 2011, 18h
in: 2º Coloquio "Occupational safety and health" (5th session), FEUP-DemSSO, 17 Decembee 2011, 18h
2/7/11
reabilitação urbana
Colóquio internacional
Portugal entre desassossegos e desafios
17 e 18 de Fevereiro de 2011
Auditório da Faculdade de Economia da Universidade de Coimbra
...
11. Novas urbanidades, governação e espaço – Sala 3.4
O discurso de reinvenção da ruralidade - um projecto urbano de ruralidade patrimonial e consumível
Ana Matos Fernandes
As cidades pequenas e o turismo: Hierarquias e ordens da grandeza urbana
Carina Gomes
Reabilitação urbana e intervenção em centros históricos: Alguns desafios e evolução de paradigmas em Portugal
Gonçalo M. Furtado C. Lopes, Rosa Ângela Fernandes Macedo
Precariedade geográfica e processos de desterritorialização in situ nos espaços urbanos portugueses. Reflexão a partir de alguns exemplos
João Luís J. Fernandes
Catalisar a Governança na Cidade Paradoxal. A Carta Estratégica de Lisboa, o Estudo da Qualidade de Vida e da Governação Urbana, e as incertezas de empoderamento político na capital portuguesa
João Seixas
Mumbai, from 19th to 21st Century
Nuno Miguel da Silveira Campos Pereira Grancho
Moderador: Paulo Peixoto (CES/FEUC)
...
Portugal entre desassossegos e desafios
17 e 18 de Fevereiro de 2011
Auditório da Faculdade de Economia da Universidade de Coimbra
...
11. Novas urbanidades, governação e espaço – Sala 3.4
O discurso de reinvenção da ruralidade - um projecto urbano de ruralidade patrimonial e consumível
Ana Matos Fernandes
As cidades pequenas e o turismo: Hierarquias e ordens da grandeza urbana
Carina Gomes
Reabilitação urbana e intervenção em centros históricos: Alguns desafios e evolução de paradigmas em Portugal
Gonçalo M. Furtado C. Lopes, Rosa Ângela Fernandes Macedo
Precariedade geográfica e processos de desterritorialização in situ nos espaços urbanos portugueses. Reflexão a partir de alguns exemplos
João Luís J. Fernandes
Catalisar a Governança na Cidade Paradoxal. A Carta Estratégica de Lisboa, o Estudo da Qualidade de Vida e da Governação Urbana, e as incertezas de empoderamento político na capital portuguesa
João Seixas
Mumbai, from 19th to 21st Century
Nuno Miguel da Silveira Campos Pereira Grancho
Moderador: Paulo Peixoto (CES/FEUC)
...
1/18/11
PP97: Architectural Modeling of Components in Composite Materials for Temporary Shelter Facilities
A Chaves, G Furtado, J Lino3
The PP97 had, for its object and title, the "architectural modeling of components in composite materials for temporary shelter facilities”, and its development comprised several disciplines (architecture, design, engineering, etc.). The results and targets included a computer modeling and a prototype with its components, as well the strategies outlined for their manufacture and distribution. Overall, the study was structured into three areas or components - “project”, “manufacture” and “analysis / dissemination” - which were developed interactively in two phases.
The area of research "project" involved the conception/designing of installation for temporary shelters facilities, its components, configurations and conditions of assembly by the user. The relevance of the proposed solution was thus identified and in order to be used for instance in the context of social action. The concept of the product, based on the idea that the construction materials could reuse abundant and wasted materials for the production of the temporary shelters by applying expeditious construction techniques, was also defined. The study was carried out by, at first, a formal and geometric speculation, followed by the accomplishment of designs with all the necessary detail, and later, studies with 3D computer modeling.
This was preceded by the accomplishment and coordination of computational models with 3D CAM in the area of research "manufacture”. Production techniques with composite materials, which enabled collaboration with INEGI, were studied, and several series of experiments were performed. These were later and more swiftly continued at the FAUP. For their relevance, composite materials consisting of waste (rubble, etc.) and binders (polymers, etc.), as well as additive and subtractive techniques of rapid prototyping with milling and “MakerBot” machinery´s model / formwork were selected. In accordance with what was expected, prototypes of the shelter facility and its components were accomplished, which tried to simulate the conditions existing in-situ for the manufacture and assembly. Collaboration with the workshop of printing techniques of FBAUP has been also developed, exploring the graphic treatment of the installation components and envisioning ways of appropriation by the user.
This stage consisted of a brief "analysis" functional and aesthetic, which, for example, enabled collaboration with designer Dirk Lloyens of ESAD / UM, comprising an environmental analysis of light and heat. In parallel, strategies related to the "spread" of the investigation of PP97 and its products were outlined. On one hand, the discussion of an "application" that uses the channels as a means of social or marketing, etc. On the other hand the "advertisement" in both scientific and general contexts. This fostered, in the first case, collaboration with the Porto GAS group, including the carrying out of investigations and the outlining of lines of action. In the second case, presentations and an exhibition at “Galeria dos Leões” were carried out (RUP).
In short, the investigation conducted allowed for the projection of a versatile installation for temporary shelter facilities, composed of several architectural components, modeled with the computer support of CAD-CAM. The established process for manufacturing these components included mold / formwork and rapid prototyping, as well as composite materials made with matrix and specific binders. Finally we have developed an analysis of the product and outlined the strategies for its “spread” and commercialization.
A Chaves, G Furtado, J Lino3
The PP97 had, for its object and title, the "architectural modeling of components in composite materials for temporary shelter facilities”, and its development comprised several disciplines (architecture, design, engineering, etc.). The results and targets included a computer modeling and a prototype with its components, as well the strategies outlined for their manufacture and distribution. Overall, the study was structured into three areas or components - “project”, “manufacture” and “analysis / dissemination” - which were developed interactively in two phases.
The area of research "project" involved the conception/designing of installation for temporary shelters facilities, its components, configurations and conditions of assembly by the user. The relevance of the proposed solution was thus identified and in order to be used for instance in the context of social action. The concept of the product, based on the idea that the construction materials could reuse abundant and wasted materials for the production of the temporary shelters by applying expeditious construction techniques, was also defined. The study was carried out by, at first, a formal and geometric speculation, followed by the accomplishment of designs with all the necessary detail, and later, studies with 3D computer modeling.
This was preceded by the accomplishment and coordination of computational models with 3D CAM in the area of research "manufacture”. Production techniques with composite materials, which enabled collaboration with INEGI, were studied, and several series of experiments were performed. These were later and more swiftly continued at the FAUP. For their relevance, composite materials consisting of waste (rubble, etc.) and binders (polymers, etc.), as well as additive and subtractive techniques of rapid prototyping with milling and “MakerBot” machinery´s model / formwork were selected. In accordance with what was expected, prototypes of the shelter facility and its components were accomplished, which tried to simulate the conditions existing in-situ for the manufacture and assembly. Collaboration with the workshop of printing techniques of FBAUP has been also developed, exploring the graphic treatment of the installation components and envisioning ways of appropriation by the user.
This stage consisted of a brief "analysis" functional and aesthetic, which, for example, enabled collaboration with designer Dirk Lloyens of ESAD / UM, comprising an environmental analysis of light and heat. In parallel, strategies related to the "spread" of the investigation of PP97 and its products were outlined. On one hand, the discussion of an "application" that uses the channels as a means of social or marketing, etc. On the other hand the "advertisement" in both scientific and general contexts. This fostered, in the first case, collaboration with the Porto GAS group, including the carrying out of investigations and the outlining of lines of action. In the second case, presentations and an exhibition at “Galeria dos Leões” were carried out (RUP).
In short, the investigation conducted allowed for the projection of a versatile installation for temporary shelter facilities, composed of several architectural components, modeled with the computer support of CAD-CAM. The established process for manufacturing these components included mold / formwork and rapid prototyping, as well as composite materials made with matrix and specific binders. Finally we have developed an analysis of the product and outlined the strategies for its “spread” and commercialization.
Subscribe to:
Posts (Atom)